Xerox WorkCentre 5021 - Page 46

08/2012
2-35
WorkCentre 5021/5019
071-105
Status Indicator RAPs
Initial Issue
071-105 Regi Sensor On Jam (Tray 1)
BSD-ON:CH8.3, CH4.1, CH8.1
During paper feed from Tray 1, the Regi Sensor did not turn ON within the specified time after
the Tray 1 Feed Clutch On.
Cause/Action
Check the following:
• The Regi Sensor (Input Check [071-105]) for operation failure. (PL 15.1)
• The Main Drive Motor (Output Check [042-001]) for operation failure. (PL 3.1)
• The Tray 1 Feed Clutch (Output Check [072-001]) for operation failure. (PL 9.1)
• The Feed Roll for contamination, wear, and transportation failure due to deterioration.
• The Drive Gear for wear and damage.
• A paper transportation failure due to foreign substances on the paper path.
• Usage of out of spec paper.
If no problems are found, replace the ESS/MCU PWB. (PL 18.1)