Yamaha MT-09 2021 - Page 252

5-25
CAMSHAFTS
15.Install:
• Timing chain guide (top side)
• Cylinder head cover gasket “1”
• Cylinder head cover
TIP
• Apply Three Bond No. 1541C® onto the mat-
ing surfaces of the cylinder head cover and cyl-
inder head cover gasket.
• After installing the cylinder head cover gasket
“1” to the cylinder head cover, cut off the “a”
section.
16.Install:
• Spark plug
• Ignition coil “1”
TIP
Install the ignition coils “1” in the direction shown
in the illustration.
Cylinder head cover bolt
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Spark plug
13 N·m (1.3 kgf·m, 9.6 lb·ft)
1
2
New
T
R
.
.
1
a
New
T
R
.
.
1