YASKAWA SGD7S

9.1 Monitoring Product Information
9.1.2 Operating Procedures
9-3
9
Monitoring
9.1.2 Operating Procedures
Use the following procedure to display the Servo Drive product information.
• Select Read Product Information in the Menu Dialog Box of the SigmaWin+. The Read
Product Information Window will be displayed.
• With the Panel Operator, you can use Fn011 and Fn012 to monitor this information.
Refer to the following sections for the differences in the monitor items compared with the
SigmaWin+.
13.4.16 Display Servomotor Model (Fn011) on page 13-24
13.4.17 Display Software Version (Fn012) on page 13-25
• With the Digital Operator, you can use Fn011, Fn012, and Fn01E to monitor this informa-
tion.
Refer to the following manual for the differences in the monitor items compared with the
SigmaWin+.
Σ-7-Series Digital Operator Operating Manual (Manual No.: SIEP S800001 33)
Information