Yealink SIP-T48G

Getting Started
93
Parameters
Permitted Values
Default
firmware.url
URL within 511 characters
Blank
Description:
Configures the access URL of the firmware file.
Example:
firmware.url = http://192.168.1.20/44.80.0.60.rom
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Upgrade->Select and Upgrade Firmware
Phone User Interface:
None
To configure the way for the IP phone to check for configuration files via web user
interface:
1. Click on Settings->Auto Provision.
2. Make the desired change.