Yealink SIP-T48G Administrator's Guide

Configuring Basic Features
421
Reboot in talking feature allows IP phones to reboot during an active call when it
receives a reboot request by action URI. For more information on action URI, refer to
Action URI on page 554.
IP phones do not receive and handle HTTP/HTTPS GET requests by default. To use this
feature, you need to specify the trusted IP address(es) for action URI in advance. For
more information, refer to Configuring Trusted IP Address for Action URI on page 559.
Procedure
Reboot in talking can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure reboot in talking.
Parameter:
features.reboot_in_talk_enable
Local
Web User Interface
Configure reboot in talking.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Details of Configuration Parameters:
Parameter
Permitted Values
Default
features.reboot_in_talk_enable
0 or 1
0
Description:
Enables or disables the phone to reboot during a call when it receives a reboot
request by action URI.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “features.action_uri_limit_ip” is set to
“any” or trusted IP address(es) and it is not the first time for the IP phone to receive
HTTP/HTTPS GET request from the trusted IP address(es).
Web User Interface:
Features->General Information->Reboot in Talking
Phone User Interface:
None
To configure reboot in talking via web user interface:
1. Click on Features->General Information.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm