Yealink SIP-T48G

Configuring Basic Features
123
6. Tap the Save soft key to accept the change.
Enable page tips feature allows users to enable the page icon and page switch key LED
to indicate different statuses. It is mainly used in the scenario of configuring multi-page
line key. It is only applicable to SIP-T46G/T29G/T42G/T41P/T27P IP phones.
The following table lists the page icons to indicate different statuses:
Phone Models
Icons
Description
SIP-T46G/T29G
Fast flashing: the BLF monitored user receives an
incoming call on the non-current page.
Solid: there is a parked call to the line on the
non-current page.
Fast flashing: the line receives an incoming call on
the non-current page.
SIP-T42G/T41P/T27P
Fast flashing:
The BLF monitored user receives an incoming call
on the non-current page.
The line receives an incoming call on the
non-current page.
Solid:
There is a parked call on the non-current page.
Procedure
Enable page tips can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure enable page tips.
Parameter:
phone_setting.page_tip
Local
Web User Interface
Configure enable page tips.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&model=1&q=load&li
nepage=1
1
1