Yealink SIP-T48G

Configuring Basic Features
363
Parameters
Permitted Values
Default
Description:
Enables or disables recent call in dialing feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can see the placed calls list when the IP phone is on the
pre-dialing screen.
Web User Interface:
Directory->Setting->Recent Call In Dialing
Phone User Interface:
None
To configure recent call in dialing via web user interface:
1. Click on Directory->Setting.
2. Select the desired value from the pull-down list of Recent Call In Dialing.
3. Click Confirm to accept the change.
ReCall, also known as last call return, allows users to place a call back to the last caller.
Recall is implemented on IP phones using a recall key.