Yealink SIP-T48G

Configuring Advanced Features
639
5. Click Confirm to accept the change.
Rport in RFC 3581, allows a client to request that the server sends the response back to
the source port from which the request came. Rport feature depends on support from a
SIP server.
Procedure
Rport feature can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure NAT Rport feature for
account.
Parameters:
account.X.nat.rport
Local
Web User Interface
Configure NAT Rport feature for
account.
Navigate to:
http://<phoneIPAddress>/servlet?p
=account-adv&q=load&acc=0
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.nat.rport
0, 1 or 2
0
Description:
Enables or disables NAT Rport feature for account X.
0-Disabled
1-Enabled
2-enable direct process
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Advanced->RPort