Yealink SIP-T48G

Configuring Basic Features
335
Transfer mode via dsskey enables IP phones to handle the current call differently via the
DSS key. IP phones support three transfer modes: New Call, Blind Transfer and Attended
Transfer. For more information on Blind Transfer and Attended Transfer, refer to Call
Transfer on page 322.
Note
The transfer mode via dsskey feature is available when the DSS key is assigned to the
following features:
 Speed dial
 Transfer
 BLF/BLF List
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 796.
Procedure
Transfer mode via dsskey can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the transfer mode via
dsskey.
Parameter:
transfer.dsskey_deal_type
Local
Web User Interface
Configure the transfer mode via
dsskey.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
Details of the Configuration Parameter:
Parameters
Permitted Values
Default
transfer.dsskey_deal_type
0, 1 or 2
2
Description:
Configures the transfer mode when user presses the DSS key during an active call.
To use this feature, you need to configure the DSS key as a speed dial, transfer or
BLF/BLF List in advance.
It is not applicable to SIP-T19(P) E2 and CP860 IP phones.