Yealink SIP-T48G

Configuring Basic Features
141
Parameters
Permitted Values
Default
Settings->Call Display->Call Information Display Method
Phone User Interface:
None
To configure call display features via web user interface (take SIP-T23G IP phones for
example):
1. Click on Settings->Call Display.
2. Select the desired value from the pull-down list of Display Called Party Information.
3. Select the desired value from the pull-down list of Call Information Display Method.
4. Click Confirm to accept the change.
To configure call display features via web user interface (take SIP-T46G IP phones for
example):
1. Click on Settings->Call Display.
2. Select the desired value from the pull-down list of Display Contact Photo.
3. Select the desired value from the pull-down list of Display Called Party Information.
4. Select the desired value from the pull-down list of Call Information Display Method.
5. Click Confirm to accept the change.
When the IP phone is on the pre-dialing or dialing screen, the account information will