Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
338
2. Select the desired value from the pull-down list of Allow Trans Exist Call.
3. Click Confirm to accept the change.
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call using a directed pickup key or the DPickup soft key.
This feature depends on support from a SIP server. For many SIP servers, directed call
pickup requires a directed pickup code, which can be configured on a phone or a
per-line basis.
Note
Procedure
Directed call pickup can be configured using the configuration files or locally.
Configure the directed call
pickup code on a per-line basis.
Parameter:
account.X.direct_pickup_code
Configure directed call pickup
features on a phone basis.
Parameters:
features.pickup.direct_pickup_en
able
features.pickup.direct_pickup_co
It is recommended not to configure the directed call pickup key and the DPickup soft key
simultaneously. If you do, the directed call pickup key will not be used correctly.
To Next Page
Loading...
