Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
264
Parameter
Permitted Values
Default
If it is set to 1 (Enabled), the caller is notified when the callee becomes available to
receive a call.
Web User Interface:
Features->General Information->Call Completion
Phone User Interface:
Menu->Features->Call Completion->Call Completion
To configure call completion via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Call Completion.
3. Click Confirm to accept the change.
To configure call completion via phone user interface:
1. Press Menu->Features->Call Completion.
2. Press or , or the Switch soft key to select the desired value from the Call
Completion field.
3. Press the Save soft key to accept the change.
Anonymous call allows the caller to conceal the identity information displayed on the
callee’s screen. The callee’s phone LCD screen prompts an incoming call from
anonymity. Anonymous call is configurable on a per-line basis.