Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
198
2. Enter the string in the Prefix field.
3. Enter the string in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the replace rule will apply to all accounts on
the IP phone.
5. Click Add to add the replace rule.
The replace rule template helps with the creation of multiple replace rules.
You can ask the distributor or Yealink FAE for replace rule template. You can also obtain
the replace rule template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the replace rule template, refer to Obtaining Configuration
Files and Resource Files on page 48.
When editing a replace rule template file, learn the following:
 <DialRule> indicates the start of the template file and </DialRule> indicates the
end of the template file.
 When specifying the desired line(s) to apply the replace rule, the valid values are 0
and line ID. Multiple line IDs are separated by commas. It is not applicable to
SIP-T19(P) E2 and CP860 IP phones.
The following table lists valid values of line ID for each phone model.
Phone Model
Values
Description
SIP-T48G/T46G/T29G
0~16
0 stands for all lines

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm