Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
124
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
phone_setting.page_tip
0 or 1
0
Description:
Enables or disables the page icon and page switch key LED to indicate different
states of line keys on the non-current page.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T46G/T29G/T42G/T41P/T27P IP phones.
Web User Interface:
DSSKey->Line Key->Enable Page Tips
Phone User Interface:
None
To configure the page icon to indicate status via web user interface:
1. Click on DSSKey->Line Key.
2. Select Enabled from the pull-down list of Enable Page Tips.
3. Click Confirm to accept the change.
Label length allows IP phones to extend the display length of the line key label. If the
label length feature is enabled, more characters will be displayed on the idle LCD
screen. It is only applicable to SIP-T48G/T46G/T29G IP phones.