EasyManuals Logo

Yealink SIP-T48G Administrator's Guide

Yealink SIP-T48G
898 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #792 background imageLoading...
Page #792 background image
Administrators Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
772
This section describes solutions to common issues that may occur while using the IP
phone. Upon encountering a scenario not listed in this section, contact your Yealink
reseller for further support.
Do one of the following:
Ensure that the Ethernet cable is plugged into the Internet port on the IP phone and
the Ethernet cable is not loose.
Ensure that the Ethernet cable is not damaged.
Ensure that the IP address and related network parameters are set correctly.
Ensure that your network switch or hub is operational.
Do one of the following:
Reset another available IP address for the IP phone.
Check network configuration via phone user interface at the path
Menu->Advanced->Network->WAN Port->IPv4 (or IPv6). If the Static IP is selected,
select DHCP instead.
Scenario 1:
If the IP phone obtains the IPv6 address, the format of the URL to access the web user
interface is
[IPv6 address] or
http(s)://[IPv6 address]
. For example, if the IPv6
address of your phone is fe80::204:13ff:fe30:10e, you can enter the URL (e.g.,
[fe80::204:13ff:fe30:10e] or http(s)://[fe80::204:13ff:fe30:10e]) in the address bar of a
web browser on your PC to access the web user interface.
Scenario 2:
Yealink IP phones support using FTP, TFTP, HTTP and HTTPS protocols to download
configuration files or resource files. You can use one of these protocols for provisioning.
When provisioning your IP phone obtaining an IPv6 address, the provisioning server
should support IPv6 and the format of the access URL of the provisioning server can be

Table of Contents

Other manuals for Yealink SIP-T48G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48G and is the answer not in the manual?

Yealink SIP-T48G Specifications

General IconGeneral
Expansion module supportYes
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Volume control-
Display diagonal7 \
Display resolution800 x 480 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
AC adapter input voltage100 - 240 V
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Width266 mm
Height185 mm

Related product manuals