Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
156
3. Enter the time in the Time(HMS) field.
4. Press the Save soft key to accept the change.
To configure the time and date formats via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2. Press or , or the Switch soft key to select the desired time format from the
Time Format field.
3. Press or , or the Switch soft key to select the desired date format from the
Date Format field.
4. Press the Save soft key to accept the change.
Daylight Saving Time (DST) is the practice of temporary advancing clocks during the
summer time so that evenings have more daylight and mornings have less. Typically,
clocks are adjusted forward one hour at the start of spring and backward in autumn.
Many countries have used the DST at various times, details vary by location. By default,
the DST is set to Automatic, so it can be adjusted automatically from the current time
zone configuration. You can configure DST for the desired area as required.
Procedure
Daylight saving time can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure DST.
Parameters:
local_time.summer_time
local_time.dst_time_type
local_time.start_time
local_time.end_time
local_time.offset_time
Local
Web User Interface
Configure DST.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-datetime&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
local_time.summer_time
0, 1 or 2
2

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm