Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
678
Parameters
Permitted Values
Default
Phone User Interface:
None
voice.tone.autoanswer
String
Blank
Description:
Customizes the warning tone for auto answer.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if the value of the parameter “voice.tone.country” is set to
Custom.
Web User Interface:
Settings->Tones->Auto Answer
Phone User Interface:
None
To configure tones via web user interface:
1. Click on Settings->Tones.
2. Select the desired value from the pull-down list of Select Country.
If you select Custom, you can customize a tone for each condition of the IP phone.
3. Click Confirm to accept the change.
Voice mail tone feature allows the IP phone to play a warning tone when receiving a
new voice mail. You can customize the warning tone or select specialized tone sets
(vary from country to country) for your IP phone. For more information, refer to Tones on