Yealink SIP-T48G

Configuring Basic Features
143
To configure display method on dialing via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Display Method on Dialing field.
3. Click Confirm to accept the change.
Web server type determines access protocol of the IP phone’s web user interface. IP
phones support both HTTP and HTTPS protocols for accessing the web user interface.
HTTP is an application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is
a web protocol that encrypts and decrypts user page requests as well as pages
returned by the web server. Both HTTP and HTTPS port numbers are configurable.
Procedure
Web server type can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the web access type,
HTTP port and HTTPS port.
Parameters:
wui.http_enable
network.port.http
wui.https_enable
network.port.https
Local
Web User Interface
Configure the web access type,
HTTP port and HTTPS port.
Navigate to: