Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
144
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Phone User Interface
Configure the web access type,
HTTP port and HTTPS port.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
wui.http_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using the
HTTP protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTP
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTP Status
network.port.http
Integer from 1 to 65535
80
Description:
Configures the HTTP port for the user to access web user interface of the IP phone
using the HTTP protocol.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTP Port(1~65535)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTP Port
wui.https_enable
0 or 1
1