Yealink SIP-T48G

Configuring Basic Features
197
Parameters
Permitted Values
Default
None
dialplan.replace.replace.X
(X ranges from 1 to 100)
String within 32 characters
Blank
Description:
Configures the alternate number to replace the entered number.
Example:
dialplan.replace.prefix.1 =1 and dialplan.replace.replace.1 = 254245
When you enter the number ”1” and press the send key, the number “254245” will
replace the entered number “1”.
Web User Interface:
Settings->Dial Plan->Replace Rule->Replace
Phone User Interface:
None
dialplan.replace.line_id.X
(X ranges from 1 to 100)
Refer to the following content
Blank (for
all lines)
Description:
Configures the desired line to apply the replace rule. The digit 0 stands for all lines. If
it is left blank, the replace rule will apply to all lines on the IP phone.
Permitted Values:
0 to 16 (for SIP-T48G/T46G/T29G)
0 to 12 (for SIP-T42G)
0 to 6 (for SIP-T41P/T27P)
0 to 3 (for SIP-T40P/T23P/T23G)
0 to 2 (for SIP-T21(P) E2)
Example:
dialplan.replace.line_id.1 = 1,2
Note: Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P) E2
and CP860 IP phones.
Web User Interface:
Settings->Dial Plan->Replace Rule->Account
Phone User Interface:
None
To create a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.