Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
364
Procedure
Recall key can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Assign a recall key.
Parameter:
linekey.X.type/
programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.label/
programablekey.X.label/
expansion_module.X.key.Y.label
Local
Web User Interface
Assign a recall key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Phone User Interface
Assign a recall key.
ReCall Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 796.
Details of Configuration Parameters:
Parameter
Permitted Values
Default
linekey.X.type/
programablekey.X.type/
expansion_module.X.key.Y.type
7
Refer to the
following content
Description:
Configures a DSS key as a recall key on the IP phone.
The digit 7 stands for the key type ReCall.
For line keys:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programable keys:
X=1-10, 12-14 (for SIP-T48G/T46G)

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm