Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
122
2. Click to select the desired wireless network which you want to adjust the priority,
and then click or .
3. Repeat step 2 to adjust the priority of more wireless networks.
To enable the Wi-Fi feature via phone user interface:
1. Tap ->Basic->Wi-Fi.
2. Tap the On radio box of the Wi-Fi field.
The IP phone scans the available wireless network automatically.
To add Wi-Fi network:
1. Tap ->Basic->Wi-Fi.
2. Tap the On radio box of the Wi-Fi field.
3. Tap Add.
4. Tap the Security Mode field.
5. Tap the desired value in the pop-up dialog box.
- If you select None or WEP:
a) Enter the desired profile name in the Profile Name field.
b) Enter the desired value in the SSID field.
c) Enter the desired password in the WPA Shared Key field.
- If you select WPA-PSK or WPA2-PSK:
a) Enter the desired profile name in the Profile Name field.
b) Enter the desired value in the SSID field.
c) Tap the Cipher Type field.
d) Tap the desired Cipher type (TKIP, AES or TKIP AES) in the pop-up dialog
box.
e) Enter the desired password in the WPA Shared Key field.