Yealink SIP-T48G Administrator's Guide

Configuring Basic Features
103
Parameters
Permitted
Values
Default
features.missed_call_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it misses a
call.
0-Disabled
1-Enabled
Web User Interface:
Features->Notification Popups->Display Missed Call Popup
Phone User Interface:
None
features.forward_call_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it forwards
an incoming call to other party.
0-Disabled
1-Enabled
Web User Interface:
Features->Notification Popups->Display Forward Call Popup
Phone User Interface:
None
features.text_message_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it receives
a new text message.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter “features.text_message.enable” is set
to 1 (Enabled).
Web User Interface:
Features->Notification Popups->Display Text Message Popup
Phone User Interface:
None

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm