EasyManua.ls Logo

Yealink SIP-T48G

Yealink SIP-T48G
898 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
112
content
Description:
Configures the delay time (in seconds) to change the intensity of the LCD screen
when the IP phone is inactive.
0-Always On
1-Always Off (not applicable to SIP-T48G/T46G/T29G IP phones)
15-15s
30-30s
60-60s
120-120s
300-300s
600-600s
1800-1800s
If it is set to 60 (60s), the intensity of the LCD screen will be changed when the IP
phone has been inactivated for 60 seconds.
For SIP-T48G/T46G/T42G/T41P/T29G/CP860:
The default value is 0.
For SIP-T40P/T27P/T23P/T23G/T21(P) E2:
The default value is 30.
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Settings->Preference->Backlight Time(seconds)
Phone User Interface:
Menu->Settings->Basic Settings->Display->Backlight->Backlight Time
To configure backlight via web user interface (take SIP-T23G IP phones for example):
1. Click on Settings->Preference.

Table of Contents

Other manuals for Yealink SIP-T48G

Related product manuals