Yealink SIP-T48G Administrator's Guide

Configuring Basic Features
161
Element
Type
Values
Description
keep their daylight saving
time the same)
iType
optional
0/1
0: DST by Date
1: DST by Week
DST time type
(This item is needed if
you want to configure
DST.)
szStart
optional
Month/Day/Hour (for iType=0)
Month: 1~12
Day: 1~31
Hour: 0 (midnight)~23
Month/Week of Month/Day of
Week/Hour of Day (for
iType=1)
Month: 1~12
Week of Month: 1~5 (the last
week)
Day of Week: 1~7
Hour of Day: 0 (midnight)~23
Start time of the DST
szEnd
optional
Same as szStart
End time of the DST
szOffset
optional
Integer from -300 to 300
The offset time (in
minutes) of DST
When customizing an AutoDST file, learn the following:
 <DSTData> indicates the start of a template and </DSTData> indicates the end of
a template.
 Add or modify time zone and DST settings between <DSTData> and </DSTData>.
 The display order of time zone is corresponding to the szTime order specified in the
AutoDST.xml file.
 If the start time of DST is greater than the end time, the valid time of DST is from the
start time of this year to the end time of the next year.
Customizing an AutoDST file:
1. Open the AutoDST file using an ASCII editor.
2. Add or modify time zone and DST settings as you want in the AutoDST file.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm