Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
172
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-preference&q=load
Phone User Interface
Specify the language for the
phone user interface.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
lang.gui
Refer to the following content
English
Description:
Configures the language used on the phone user interface.
Permitted Values:
English, Chinese_S, Chinese_T, French, German, Italian, Polish, Portuguese, Spanish,
Turkish, Russian or the custom language name.
Example:
lang.gui = English
If you want to use the custom language (e.g., Guilan) for the IP phone, configure the
parameter “lang.gui = Guilan”.
Web User Interface:
None
Phone User Interface:
Menu->Settings->Basic Settings->Language
lang.wui
Refer to the following content
English
Description:
Configures the language used on the web user interface.
Permitted Values:
English, Chinese_S, Chinese_T, French, German, Italian, Polish, Portuguese, Spanish,
Turkish, Russian or the custom language name.
Example:
lang.wui = English
If you want to use the custom language (e.g., Wuilan) for the IP phone, configure the
parameter “lang.wui = Wuilan”.
Note: If the language of your browser is not supported by the IP phone, the web user
interface will use English by default.
Web User Interface: