Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
190
Parameters
Permitted Values
Default
server “192.168.1.20”, and downloads the CallIn state file from the “XMLfiles”
directory.
Web User Interface:
None
Phone User Interface:
None
custom_softkey_connecting.url
URL within 511 characters
Blank
Description:
Configures the access URL of the custom file for the soft key presented on the LCD
screen when in the Connecting state.
Example:
custom_softkey_connecting.url = http://192.168.1.20/XMLfiles/Connecting.xml
During the auto provisioning process, the IP phone connects to the provisioning
server “192.168.1.20”, and downloads the Connecting state file from the “XMLfiles”
directory.
Web User Interface:
None
Phone User Interface:
None
custom_softkey_dialing.url
URL within 511 characters
Blank
Description:
Configures the access URL of the custom file for the soft key presented on the LCD
screen when in the Dialing state.
Example:
custom_softkey_dialing.url = http://192.168.1.20/XMLfiles/Dialing.xml
During the auto provisioning process, the IP phone connects to the provisioning
server “192.168.1.20”, and downloads the Dialing state file from the “XMLfiles”
directory.
Note: It is not applicable to SIP-T48G IP phones.
Web User Interface:
None
Phone User Interface:
None