Yealink SIP-T48G - Page 222

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
202
Parameters
Permitted Values
Default
0 to 16 (for SIP-T48G/T46G/T29G)
0 to 12 (for SIP-T42G)
0 to 6 (for SIP-T41P/T27P)
0 to 3 (for SIP-T40P/T23P/T23G)
0 to 2 (for SIP-T21(P) E2)
Example:
dialplan.dialnow.line_id.1 = 1,2
Note: Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P) E2
and CP860 IP phones.
Web User Interface:
Settings->Dial Plan->Dial-now->Account
Phone User Interface:
None
phone_setting.dialnow_delay
Integer from 0 to 14
1
Description:
Configures the delay time (in seconds) for the dial-now rule.
When entered numbers match the predefined dial-now rule, the IP phone will
automatically dial out the entered number after the designated delay time.
Web User Interface:
Features->General Information->Time-Out for Dial-Now Rule
Phone User Interface:
None
To create a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.