Yealink SIP-T48G

Configuring Basic Features
241
Procedure
Live dialpad can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure live dialpad.
Parameters:
phone_setting.predial_autodial
phone_setting.inter_digit_time
Local
Web User Interface
Configure live dialpad.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-preference&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.predial_autodial
0 or 1
0
Description:
Enables or disables the live dialpad feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will automatically dial out the entered phone
number on the dialing screen without pressing a send key.
Web User Interface:
Settings->Preference->Live Dialpad
Phone User Interface:
None
phone_setting.inter_digit_time
Integer from 1 to
14
4
Description:
Configures the delay time (in seconds) for the IP phone to automatically dial out the
entered digits without pressing a send key.
Note: It works only if the value of the parameter “phone_setting.predial_autodial” is
set to 1 (Enabled).
Web User Interface:
Settings->Preference->Inter Digit Time(1~14s)
Phone User Interface:
None