Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
246
Procedure
Redial tone can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure redial tone feature.
Parameters:
features.redial_tone
Local
Web User Interface
Configure redial tone feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-audio&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.redial_tone
Integer within 6 digits
Blank
Description:
Configures the IP phone to continue to play the dial tone after inputting the preset
numbers on the pre-dialing screen.
Example:
features.redial_tone = 123
The IP phone will continue to play the dial tone after inputting “123” on the
pre-dialing screen.
If it is left blank, the IP phone will not play the dial tone after inputting numbers on
the pre-dialing screen.
Web User Interface:
Features->Audio->Redial Tone
Phone User Interface:
None
To configure redial tone via web user interface:
1. Click on Features->Audio.