Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
270
Phone User Interface
Configure anonymous call rejection.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.reject_anonymous_call
0 or 1
0
Description:
Triggers the anonymous call rejection feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the IP phone will automatically reject incoming calls from users
enabled anonymous call feature. The anonymous user’s phone LCD screen presents
“Anonymity Disallowed”.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Basic->Local Anonymous Rejection
Phone User Interface:
Menu->Features->Anonymous Call->Anonymous Rejection
account.X.send_anonymous_rejection_code
0 or 1
0
Configures the IP phone to send anonymous rejection on/off code to
activate/deactivate the server-side anonymous call rejection feature for account X.
0- Off code
1- On code
If it is set to 0 (Off Code), the IP phone will send anonymous rejection off code to the
server when you deactivate the anonymous call rejection feature.
If it is set to 1 (On Code), the IP phone will send anonymous rejection on code to the
server when you activate the anonymous call rejection feature.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)