Yealink SIP-T48G

Configuring Basic Features
275
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-general&q=load
Assign a DND key.
Navigate to:
http://<phoneIPAddress>/servlet?
p=dsskey&q=load&model=0
Phone User Interface
Configure DND.
Assign a DND key.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.dnd_mode
0 or 1
0
Description:
Configures the DND mode for the IP phone.
0-Phone
1-Custom
If it is set to 0 (Phone), DND feature is effective for the IP phone.
If it is set to 1 (Custom), you can configure DND feature for each account.
Note: It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Features->Forward&DND->DND->Mode
Phone User Interface:
None
account.X.dnd.enable
0 or 1
0
Description:
Triggers DND feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the IP phone will reject incoming calls on account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G )