Yealink SIP-T48G

Configuring Basic Features
297
Session-Expires: 90;refresher=uac
Supported: timer
Content-Length: 0
Procedure
Session timer can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure session timer.
Parameters:
account.X.session_timer.enable
account.X.session_timer.expires
account.X.session_timer.refresher
Local
Web User Interface
Configure session timer.
Navigate to:
http://<phoneIPAddress>/servlet
?p=account-adv&q=load&acc=
0
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.session_timer.enable
0 or 1
0
Description:
Enables or disables the session timer for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), IP phone will send periodic UPDATE requests to refresh the
session during a call.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Advanced->Session Timer
Phone User Interface:
None