Configuring Basic Features
309
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Features->Forward&DND->Forward->Always Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Always Forward
account.X.always_fwd.target
String within 32
characters
Description:
Configures the destination number of the always forward for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It works only if the value of the parameter “features.fwd_mode” is set to 1
(Custom). It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Example:
account.1.always_fwd.target = 1003
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Target
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Forward to
account.X.always_fwd.on_code
String within 32
characters
Description:
Configures the always forward on code to activate the server-side always forward
feature for account X. The IP phone will send the always forward on code and the
pre-configured destination number to the server when you activate always forward
feature for account X on the IP phone.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)