Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
320
Parameters
Permitted Values
Default
Description:
Configures the destination number of the no answer forward for the IP phone.
Example:
forward.no_answer.target = 3603
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->Target
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->Forward to
forward.no_answer.timeout
Integer from 0 to
20
2
Description:
Configures ring times (N) to wait before forwarding incoming calls.
Incoming calls will be forwarded when not answered after N*6 seconds.
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->After Ring Time
(0~120s)
Phone User Interface:
Menu->Features->Call Forward->No Answer Forward->After Ring Time
forward.no_answer.on_code
String within 32
characters
Blank
Description:
Configures the no answer forward on code to activate the server-side no answer
forward feature. The IP phone will send the no answer forward on code and the
pre-configured destination number to the server when you activate no answer
forward feature on the IP phone.
Example:
forward.no_answer.on_code = *76
Note: For Yealink IP phones (except SIP-T19(P) E2 and CP860), it works only if the
value of the parameter “features.fwd_mode” is set to 0 (Phone).
Web User Interface:
Features->Forward&DND->Forward->No Answer Forward->On Code