Yealink SIP-T48G Administrator's Guide

Configuring Basic Features
325
1) Press or , or the Switch soft key to select the desired value from
the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code and off code respectively in
the On Code and Off Code fields.
b) If you select Busy Forward:
1) Press or , or the Switch soft key to select the desired value from
the Busy Forward field.
2) Enter the destination number you want to forward all incoming calls to
when the IP phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code and off code respectively in
the On Code and Off Code fields.
c) If you select No Answer Forward:
1) Press or , or the Switch soft key to select the desired value from
the No Answer Forward field.
2) Enter the destination number you want to forward all unanswered
incoming calls to in the Forward to field.
3) (Optional.) Enter the no answer forward on code and off code respectively
in the On Code and Off Code fields.
4) Press or , or the Switch soft key to select the ring time to wait
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
4. Press the Save soft key to accept the change.
To configure call forward in custom mode via phone user interface:
1. Press Menu->Features->Call Forward.
2. Press or to select the desired account, and then press the Enter soft key.
3. Press or to select the desired forwarding type, and then press the Enter
soft key.
4. Depending on your selection:
a) If you select Always Forward, you can configure it for a specific account.
1) Press or , or the Switch soft key to select the desired value from
the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code and off code respectively
in the On Code and Off Code fields.
You can also configure the always forward for all accounts. After the always
forward was configured for a specific account, do the following:

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm