Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
340
Parameters
Permitted Values
Default
Description:
Configures the directed call pickup code for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
account.1.direct_pickup_code = *68
Note: The directed call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface:
Account->Advanced->Directed Call Pickup Code
Phone User Interface:
None
features.pickup.direct_pickup_enable
0 or 1
0
Description:
Enables or disables the IP phone to display the DPickup soft key when the IP phone is
on the pre-dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Directed Call Pickup
Phone User Interface:
None
features.pickup.direct_pickup_code
String within 32 characters
Blank
Description:
Configures the directed call pickup code on a phone basis.
Example:
features.pickup.direct_pickup_code = *97
Note: The directed call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.