Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
350
Local
Web User Interface
Assign a group call pickup key.
Navigate to:
http://<phoneIPAddress>/servlet?p=d
sskey&q=load&model=0
Configure the group call pickup code
on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=a
ccount-adv&q=load&acc=0
Configure group call pickup feature on
a phone basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=fe
atures-callpickup&q=load
Phone User Interface
Assign a group call pickup key.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.pickup.group_pickup_enable
0 or 1
0
Description:
Enables or disables the IP phone to display the GPickup soft key when the IP phone
is on the pre-dialing screen.
0-Disabled
1-Enabled
Web User Interface:
Features->Call Pickup->Group Call Pickup
Phone User Interface:
None
account.X.group_pickup_code
String within 32 characters
Blank
Description:
Configures the group pickup code for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)