Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
358
5. Select the desired line from the pull-down list of Line.
6. Click Confirm to accept the change.
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the group call pickup code in the Group Call Pickup Code field.
4. Click Confirm to accept the change.
To configure group call pickup feature on a phone basis via web user interface:
1. Click on Features->Call Pickup.
2. Select the desired value from the pull-down list of Group Call Pickup.