Yealink SIP-T48G

Configuring Basic Features
373
Parameters
Permitted Values
Default
Web User Interface:
DSSKey->Line key->Type
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Type
linekey.X.line/
expansion_module.X.key.Y.line
Refer to the following
content
1-16 correspond to
the lines 1-16
Description:
Configures the desired line to apply the call park key.
For line keys:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For ext keys:
X ranges from 1 to 6, Y ranges from 1 to 20, 22 to 40 (Ext key 21 cannot be
configured).
Permitted Values:
1 to 16 (for SIP-T48G/T46G/T29G)
1 to 12 (for SIP-T42G)
1 to 6 (for SIP-T41P/T27P)
1 to 3 (for SIP-T40P/T23P/T23G)
1 to 2 (for SIP-T21(P) E2)
1-Line 1
2-Line 2
…
16-Line 16
Example:
linekey.1.line = 1
Note: It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
DSSKey->Line key->Line
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Account ID