Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
386
Parameters
Permitted Values
Default
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Web User Interface:
Account->Advanced->DTMF Type
Phone User Interface:
None
account.X.dtmf.dtmf_payload
Integer from 96
to 127
101
Description:
Configures the value of DTMF payload for account X.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Note: It works only if the value of parameter “account.X.dtmf.type” is set to 1
(RFC2833) or 3 (RFC2833 + SIP INFO).
Web User Interface:
Account->Advanced->DTMF Payload Type(96~127)
Phone User Interface:
None
account.X.dtmf.info_type
1, 2 or 3
1
Description:
Configures the DTMF info type.
1-DTMF-Relay
2-DTMF
3-Telephone-Event
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)