Yealink SIP-T48G

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
430
Parameters
Permitted Values
Default
Web User Interface:
None
Phone User Interface:
None
To specify access URL of the remote phone book via web user interface:
1. Click on Directory->Remote Phone Book.
2. Enter the access URL in the Remote URL field.
3. Enter the name in the Display Name field.
4. Click Confirm to accept the change.
To configure incoming/outgoing call lookup and update time interval via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select the desired value from the pull-down list of Incoming/Outgoing Call Lookup.
3. Enter the desired time in the Update Time Interval(Seconds) field.
4. Click Confirm to accept the change.