Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
450
Configure whether to handle NOTIFY
messages out of the BLF dialog.
Parameter:
account.X.out_dialog_blf_enable
Local
Web User
Interface
Assign a BLF key.
Navigate to:
http://<phoneIPAddress>/servlet?p=dss
key&q=load&model=0
Specify whether to use visual alert and
audio alert for BLF pickup.
Navigate to:
http://<phoneIPAddress>/servlet?p=fea
tures-callpickup&q=load
Configure BLF LED mode.
Navigate to:
http://<phoneIPAddress>/servlet?p=fea
tures-general&q=load
Configure the period of the BLF
subscription.
Configure whether to handle NOTIFY
messages out of the BLF dialog.
Navigate to:
http://<phoneIPAddress>/servlet?p=ac
count-adv&q=load&acc=0
Phone User
Interface
Assign a BLF key.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.pickup.blf_visual_enable
0 or 1
0
Description:
Enables or disables the IP phone to display a visual alert when the monitored user
receives an incoming call.
0-Disabled
1-Enabled
Note: It is not applicable to SIP-T19(P) E2 and CP860 IP phones.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm