Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
28
For SIP-T19(P) E2:
3. Connect the network and power:
 AC power (Optional)
 Power over Ethernet (PoE)
Note
AC Power (Optional)
To connect the AC power and network:
1) Connect the DC plug of the power adapter to the DC5V port on the IP phone and
connect the other end of the power adapter into an electrical power outlet.
2) Connect the included or a standard Ethernet cable between the Internet port on
the IP phone and the one on the wall or switch/hub device port.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2/T19(P) E2:
Note
PoE is not applicable to the SIP-T21 E2 and SIP-T19 E2 IP phones.
You can also connect the SIP-T48G IP phone to a wireless network according to your office
environment. For more information, refer to Yealink_SIP-T48G_User_Guide .

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm