Yealink SIP-T48G

Configuring Advanced Features
467
The hide feature access codes feature is applicable to the following features:
 Voice Mail
 Pick up
 Group Pick up
 Barge In (not applicable to SIP-T19(P) E2 and CP860 IP phones)
 Retrieve (not applicable to SIP-T19(P) E2 and CP860 IP phones)
 Call Park (not applicable to SIP-T19(P) E2 and CP860 IP phones)
 Call Pull
Procedure
The hide feature access codes feature can be configured using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure the hide feature
access codes feature.
Parameters:
features.hide_feature_access_co
des.enable
Local
Web User Interface
Configure the hide feature
access codes feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
features.hide_feature_access_codes.enable
0 or 1
0
Description:
Enables or disables the IP phone to display feature name instead of the feature
access code when dialing and in talk.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Hide Feature Access Codes
Phone User Interface: