Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
486
3. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access
Code field.
4. Click Confirm to accept the change.
To configure the private hold soft key via web user interface:
1. Click on Settings->Softkey Layout.
2. Select Enabled from the pull-down list of Custom Softkey.
3. Select On Talk from the pull-down list of Call States.
4. Select Private Hold from the Unselected Softkeys column and then click .
The Private Hold appears in the Selected Softkeys (Ordered by position) column.
5. Click Confirm to accept the change.
To Next Page
Loading...
