Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
494
Parameters
Permitted Values
Default
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
voice_mail.number.1 = 1234
Web User Interface:
Account->Advanced->Voice Mail
Phone User Interface:
Menu->Message->Voice Mail->Set Voice Mail->AccountX Code
account.X.display_mwi.enable
0 or 1
1
Description:
Enables or disables the IP phone to present audio and visual MWI when receiving
new voice messages.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Note: It always works at the time of Unsolicited MWI; at the time of solicited MWI,
MWI subscription feature should be configured in advance. To present audio MWI,
you also need to set the value of the parameter "features.voice_mail_tone_enable"
to 1 (Enabled) in advance.
Web User Interface:
Account->Advanced->Voice Mail Display
Phone User Interface:
None
To configure subscribe for MWI via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select the desired value from the pull-down list of Subscribe for MWI.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm