Yealink SIP-T48G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
498
multicast.paging_address.X.label
Assign a multicast paging key.
Parameters:
linekey.X.type/
programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.value/
programablekey.X.value/
expansion_module.X.key.Y.value
linekey.X.label/
programablekey.X.label/
expansion_module.X.key.Y.label
Assign a paging list key.
Parameter:
linekey.X.type/
programmable.X.type/
expansion_module.X.key.Y.type
linekey.X.label/
programmable.X.label/
expansion_module.X.key.Y.label
Local
Web User Interface
Specify a multicast codec for the IP
phone to send the RTP stream.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Configure the multicast IP address
and port number for a paging list
key.
Configure the multicast paging
group name for a paging list key.
Navigate to:
http://<phoneIPAddress>/servlet?p
=contacts-multicastIP&q=load
Assign a multicast paging key or a
paging list key.
Navigate to:
http://<phoneIPAddress>/servlet?p
=dsskey&q=load&model=0
Phone User Interface
Configure the multicast IP address
and port number for a paging list

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm