Configuring Advanced Features
511
Paging Barge
This parameter defines the priority of the voice call in progress, and decides how the IP
phone handles the incoming multicast paging calls when there is already a voice call in
progress. If the value of the parameter is configured as disabled, all incoming multicast
paging calls will be automatically ignored. If the value of the parameter is the priority
value, the incoming multicast paging calls with higher or equal priority are
automatically answered and the ones with lower priority are ignored.
Paging Priority Active
This parameter decides how the IP phone handles the incoming multicast paging calls
when there is already a multicast paging call in progress. If the value of the parameter
is configured as disabled, the IP phone will automatically ignore all incoming multicast
paging calls. If the value of the parameter is configured as enabled, an incoming
multicast paging call with higher priority or equal is automatically answered, and the
one with lower priority is ignored.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configure the listening multicast
address.
Parameters:
multicast.listen_address.X.ip_address
multicast.listen_address.X.label
Configure Paging Barge and Paging
Priority Active features.
Parameters:
multicast.receive_priority.enable
multicast.receive_priority.priority
Configure the listening multicast
address.
Configure Paging Barge and Paging
Priority Active features.
Navigate to:
http://<phoneIPAddress>/servlet?p=c
ontacts-multicastIP&q=load
To Next Page
Loading...
Need help?
General
Weight and Dimensions
