Yealink SIP-T48G - Page 541

Configuring Advanced Features
521
Parameters
Permitted Values
Default
For SIP-T40P/T23P/T23G/T21(P) E2 IP phones:
The default value is 15.
For ext keys:
When Y=1, the default value is 37 (Switch).
When Y= 2 to 20, 22 to 40, the default value is 0 (NA).
Note: It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
DSSKey->Line Key->Type
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Type
linekey.X.value/
expansion_module.X.key.Y.value
String within 99
characters
Blank
Description:
Configures the URL to record a call.
For line keys:
X ranges from 1 to 29 (for SIP-T48G).
X ranges from 1 to 27 (for SIP-T46G/T29G).
X ranges from 1 to 15 (for SIP-T42G/T41P).
X ranges from 1 to 21 (for SIP-T27P).
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For ext keys:
X ranges from 1 to 6, Y ranges from 1 to 20, 22 to 40 (Ext key 21 cannot be
configured).
Example:
linekey.1.value = http://10.3.5.97:8080/URLRecord/record.xml
Note: It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
DSSKey->Line Key->Value
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Value
linekey.X.label/
expansion_module.X.key.Y.label
String within 99
characters
Blank
Description: